THE TUGGER2™ WEIGHTED TOP NEW DESIGN WITH E-STIM OPTION
REDUCED FROM $102
THE TUGGER2™
MACHINED PENIS PLUGS
WITH E-STIM OPTION!!
WITH 3 WEIGHTS THAT NOW SCREW TOGETHER TO MAKE ONE!!
USE AS EXTRA WEIGHT OR URETHRAL TO URETHRAL PLAY FUN! MAN TO MAN!! MAN TO WOMAN! YOUR CHOICE!!
Machined from the highest quality German surgical Stainless steel on the Planet. If it says in stock than its on the shelf and ready to be shipped.
WHEN FULLY ASSEMBLED YOU AND YOUR PARTNER CAN USE THIS PLUG TOGETHER FOR URETHRAL TO URETHRAL FUN!!! MAN TO MAN OR MAN TO FEMALE AND WHAT EVER ELSE YOU CAN DREAM UP!!
The original idea came from X61525. Great guy and he also runs the PPA forum here.
This plug has a thru-hole for pissing and cumming without ever removing the plug. It comes with a Glans ring assembly to hold it in place and the Glans rings has an ID of 1.25 inches.
It comes to you with all three weighted stoppers that are threaded so you can choose the weight you want on your plug or connect all three. Not to mention the stoppers are great to keep that last drop of urine out of your pants....
The insertable length of this plug is around 2 inches (50mm) and the insert width is around 10mm.
The head of the penis plug is around 20mm and it also has a Glans ring assembley to hold the plug in place with a Glans ring that has an ID of 1.25 inches. The weight of the plug portion is around 71.5 grams.
The largest threaded stopper ball is around 15mm and weighs about 14 grams.
The medium sized threaded stopper ball is around 12mm and weighs about 7.5 grams.
The small threaded stopper ball is around 10mm and weighs about 4.8 grams.
TOTAL PLUG WEIGHT WHEN FULLY ASSEMBLED IS AROUND 93.5 GRAMS
This is a very versatile design and now adds e-stim!
1. The medium ball can be screwed in first and then the large ball screwed to it (small ball has no female threaded hole)
2. A 4 mm banana plug can be inserted into the threaded holes. We chose a quality banana plug made of nickel-plated brass, as brass won't damage threads.
3. An electrode cable can be attached with a ring terminal over one ball's threads. Don't try to crimp a terminal to a salvaged TENS pad wire as it's flimsy. Use real wire like test lead wire and panel mount "tip pin" jacks for 2 mm TENS plugs or panel mount 2 or 4 mm banana jacks if your cables end in banana plugs. Do NOT use 2 mm banana jacks for TENS pin plugs as banana jacks have no internal spring to retain the TENS pin. However, it IS OK to insert 2 mm banana lugs into 2 mm tip pin jacks. Use heat shrink tubing (preferably adhesive-lined) to insulate jack and strain relieve wire. Inline jacks are hard to find and more expensive.
NOTE: even with the through hole obstructed, the 10 mm diameter is unlikely to seal tightly enough to totally block semen during ejaculation for most men. Even if it does totally block, retrograde ejaculation into bladder is not harmful.
A design upgrade introduces
THE OPTION OF E-STIM, ELECTRO STIMULATION.
WILL ACCEPT A 4mm BANANA PLUG FOR E-STIM HOOK UPS.
FOR THOSE OF YOU WITH A TENS UNIT JUST CHOOSE THE B OPTION IN THE DROP DOWN MENU TO GET THE 4mm BANANA TO 2mm TENS PIN ADAPTER TO HOOK UP WITH EASE.
I HAVE FOUND WITH MY TENS UNIT TO USE A SMALL PIECE OF ELETRICAL TAPE TO HOLD THE TENS CORD SECURLY IN PLACE OF THE ADAPTER.
USE DROP DOWN TO MAKE YOUR CHOICE BELOW
No Tens = No Adapter
TENS = With Adapter
The way I clean and use my plugs is listed at the bottom of every page. Proper care is a must to maintain the finish. Always after cleaning be sure to blow out any thru-hole. I would use a can of compressed air that is used and sold at anyplace they sell computers. 316L is the best material for corrosion resistance. Remember that it is resistant and not corrosion free. It is important to properly care for your penis plugs for years of enjoyment. Never store them wet or with wetness inside the thru-hole.
Sizes may not be exact to sizes given in the listing. They may vary *slightly*.
- Item #: MAC-TUGGER2
